Rouse Hill is full of 2000s project homes, and the laundry is one of the rooms where the builder's budget shows most. You get a single base cabinet, a stainless tub and a long stretch of bare wall, often with the laundry sitting between the kitchen and the garage as a thoroughfare. There is rarely enough storage and nowhere sensible to fold, so for a family running washing every day it falls short fast. The footprint is usually generous though, which means real scope to add overhead cabinets, a benchtop over the machines and a proper fold area. We are a family-run joinery based in Liverpool, and we have been renovating laundries across the Hills District for 12 years. Because we run one team across cabinetry, tiling, plumbing, electrical and painting, you are not chasing five contractors trying to line up dates for a small room. We come out, measure the space and check the plumbing and power, and give you a fixed-price quote with no provisional sums buried in it. As a licensed NSW contractor (383725C) we handle the trade side properly, including the waterproofing that a laundry actually needs. Most Rouse Hill laundries are done in one to three weeks depending on the size and how much we move. We build on moisture-resistant substrate, fit a stone or laminate benchtop, run plenty of storage and soft-close hardware, and hand back a room that finally works hard.
We come to your Rouse Hill home, measure the laundry and check the plumbing, drainage and power before quoting. You get one fixed price covering cabinetry, benchtop, tiling, plumbing, electrical and painting. No provisional sums and no surprise extras turning up mid-job.
We settle the layout, cabinet finishes, benchtop, splashback and where the machines and tub sit. We plan in proper overhead storage and a fold space, and keep the through-path clear if your laundry doubles as a walkway to the garage. Once you sign off the design is locked.
We strip the old laundry, run the services, waterproof and build on moisture-resistant substrate. In a project home we often find the original waterproofing was rushed, so we redo it the right way. Because it is one family team, the plumber, sparky, tiler and painter are all coordinated by us, usually over one to three weeks.
We fit cabinetry and the benchtop, tile the splashback, paint, reconnect the machines and tub, and adjust every soft-close. We clean up, walk you through it and hand over warranty paperwork. You can do a load of washing the same day we finish.
Most Rouse Hill laundry renovations land between $5,000 and $15,000. What moves the figure is the size of the room, whether you go for a stone or laminate benchtop, how much cabinetry you want, and whether we move the plumbing or keep the machines where they are. In the project homes a job is often about adding the overhead storage and benchtop the builder left out rather than reconfiguring the room, which can keep it at the lower end. We give you one fixed-price quote up front covering cabinetry, benchtop, tiling, plumbing, electrical and painting, with no provisional sums, so the figure you sign is the figure you pay.
Most Rouse Hill laundries take one to three weeks depending on the size and how much we change. A simple swap with new cabinetry, benchtop and splashback in an existing footprint is at the quick end. Moving plumbing, redoing the waterproofing and retiling takes longer because the waterproofing has to cure properly before tiling. Because we run one team across plumbing, tiling, electrical and painting, we are not waiting on outside subbies, so the room is not sitting idle between trades. We give you a clear start and finish date up front and coordinate every step so the job stays tight.
Yes, and it is not optional in a wet area. A laundry sees constant moisture from the machines, the tub and the floor waste, so we build on moisture-resistant substrate and waterproof to the relevant Australian Standard before any tiling goes down. In Rouse Hill project homes the original laundry waterproofing was often rushed during the building boom, which is where damp problems start. As a licensed NSW contractor (383725C) we do the waterproofing by the book and document it. Getting this right is what stops mould and rot coming back a couple of years down the track.
We are a family-run joinery, not a franchise, so you deal with the same people from the first measure to the final handover. We are based in Liverpool and travel right across the Hills District, and twelve years in we are well used to the project homes around Rouse Hill and where their builder-grade laundries fall short. One team covers cabinetry, tiling, plumbing, electrical and painting, so there is no chasing five contractors for one small room. You get a fixed-price quote, a one to three week build, soft-close hardware, proper waterproofing, and a licensed NSW contractor (383725C) behind the work.
InsideOut Joinery & Renos is a family-run custom joinery and renovation business based in Liverpool, Sydney NSW 2170, serving homeowners Sydney-wide. Call 02 5000 0402 or email info@insideoutjoinery.au. One team covers every trade, with a typical 3-week turnaround, trade-cost appliances and 12 years of experience. Licensed contractor — licence 383725C, ABN 62 912 909 739.