Bathroom Renovations in Kingsgrove, Sydney

Kingsgrove is a settled St George suburb full of solid post-war brick homes, the full-brick double-fronted family houses built in the 50s and 60s on generous blocks. A lot of these are still owned by the families who have been there for decades, or by the next generation who have bought in, and the bathrooms tend to be the originals: small, with coloured tiles, a separate toilet down the hall and a cast-iron bath. The classic Kingsgrove job is opening up that cramped original layout, often pulling the separate toilet into the main room, to get a proper modern bathroom. There are also newer townhouses and granny flats around the area where space is tighter. We have been renovating bathrooms across the St George and Bayside area for 12 years and we run one team that handles the lot: demolition, plumbing, waterproofing, tiling, electrical and the fit-off. You are not chasing five separate contractors and trying to line up their calendars. We give you a fixed-price quote before we start, hold the price, and most bathrooms are finished on site in around three weeks. Licensed in NSW, contractor number 383725C, based in Liverpool and working right across Kingsgrove. From the first measure to handover you deal with the same people.

Measure and fixed-price quote

We come to your Kingsgrove home, measure the room, check the existing plumbing and drainage, and talk through what you want. Then we put together a fixed-price quote that lists every fixture, tile and trade. No vague allowances, no surprises halfway through.

Design lock-in and waterproofing prep

Once you approve the quote, we lock in the layout, finishes and fixtures so nothing changes mid-job. Combining a separate toilet into the main bathroom is common here, so we plan that carefully. We strip the old bathroom back, sort the framing and falls, then waterproof to AS 3740 standards and let it cure properly before a single tile goes down.

Tiling and trades in sequence

Plumbing rough-in, electrical, then tiling all run in the right order so each trade is not tripping over the last. Because it is one team, the sequencing is tight and the site stays clean. In the post-war brick homes we plan for what we find behind the original tiles and under the floor.

Fixtures and handover

We fit the vanity, toilet, tapware, screen and accessories, test everything, and clean up. You get a walk-through at the end, your compliance paperwork including the waterproofing certificate, and a finished bathroom you can use straight away.

Frequently asked questions

How much does a bathroom renovation cost in Kingsgrove?

Most Kingsgrove bathrooms land between $15,000 and $45,000. A cosmetic refresh, where we keep the layout and update tiles, vanity and tapware, starts from around $8,000. A full gut, where we strip back to the frame, move plumbing and re-do everything, usually runs $25,000 to $45,000 depending on the size of the room and the fixtures you choose. Combining a separate toilet into the main bathroom, common in the post-war homes here, involves moving plumbing and sits at the higher end. We give you a fixed-price quote up front that itemises every fixture and trade, so you know the number before we lift a tool and it does not move unless you change the scope.

How long will my Kingsgrove bathroom take?

Most bathrooms are finished on site in around three weeks. That covers demolition, plumbing rough-in, waterproofing and its cure time, tiling, then the fit-off of fixtures and the final clean. Waterproofing needs to dry properly before tiling, so we do not rush that stage, but because we run one team the trades follow each other tightly with no dead days waiting on a subcontractor to turn up. Reworking the footprint of an original Kingsgrove bathroom, such as removing a wall to a separate toilet, is still comfortably within the three-week window. We give you a realistic schedule with your quote and keep you posted as we go.

Do you handle waterproofing and approvals?

Yes. Waterproofing is the part most bathroom problems trace back to, so we treat it carefully. We waterproof to the NSW standard AS 3740, apply the membrane correctly to floors, walls and the shower area, and let it cure fully before tiling. You get a waterproofing certificate at handover. Most bathroom renovations do not need council approval as they are internal work, but if your job involves moving walls or extending we will tell you what is required. The original waterproofing in a 50s or 60s Kingsgrove home has usually failed, so redoing it correctly is a key part of the job.

Why should I choose InsideOut for my Kingsgrove bathroom?

We are a family-run business that has been renovating bathrooms across the St George and Bayside area for 12 years, and we are a licensed NSW contractor, number 383725C. The big difference is that one team does everything, from demolition through to the final silicone, so you are not coordinating a plumber, a tiler, an electrician and a waterproofer yourself and hoping they show up in order. We quote a fixed price, hold it, and finish most jobs in around three weeks. We are based in Liverpool and travel right across Kingsgrove, and we know the post-war brick homes and how to open up their cramped original bathrooms. You deal with the same people start to finish.

InsideOut Joinery & Renos is a family-run custom joinery and renovation business based in Liverpool, Sydney NSW 2170, serving homeowners Sydney-wide. Call 02 5000 0402 or email info@insideoutjoinery.au. One team covers every trade, with a typical 3-week turnaround, trade-cost appliances and 12 years of experience. Licensed contractor — licence 383725C, ABN 62 912 909 739.